>>> DSL-520T How to Connect DSL-520T using PPPOE?
Step 1 Connect your PC to the LAN port of your DSL-520T
Step 2 Start up a Internet explorer and key in 192.168.1.1 (by default) on address bar (e.g. http://192.168.1.1)
Note: You don't need to have internet access for this.
Step 3 Enter the Username: admin , Password: admin (by default)
Step 4 Click on the Home tab.
Step 6 Click on the Run Wizard button.
Step 7 Click on the Next icon.
Step 8 Select the correct Time zone. (e.g. GMT +07:00). Click on the Next icon.
Step 9 Select the PPPoE/PPPoA option. Click on the Next icon.
Step 10 Key in your Broadband account User Name and Password.
Key in your VPI and VCI values.
The value usually comes customized for local ISP.
VPI and VCI value;
Singnet : VPI:0, VCI:100
Pacnet : VPI:0, VCI:100
True : VPI:0, VCI:100
TOT : VPI:1, VCI:32
TT&T : VPI:0, VCI:33
BuddyBB : VPI:0, VCI:35
Streamyx : VPI:0, VCI:35
Maxis : VPI:0, VCI:35
Jaring : VPI:0, VCI:35
TelkomSpeedy : Jakarta VPI:8, VCI:35 or please ask Telkom 147 further info at your area ADSL setting. (e.g. ATM PVC Configuration, Service Category, Connection Type, Encapsulation Mode)
Select the correct Connection type. PPPoE LLC
(Username might be vary please check with your ISP for the correct username) Click on the Next icon.
Step 11 Click on the Restart icon.
Step 12 You will see that the DSL-520T is restarting. Please allow one minute of waiting time for the restart process.
Step 13 Lastly, click on the close button to return to the Web Browser configuration.
------------------------------------------------
>>> DSL-520T Virtual Server - Configuration port forwarding
Use the Virtual Server window to set up single-port, trigger port or static-port range forwarding rules applied to
inbound (WAN-to-LAN) traffic. The Virtual Server function allows remote users to access services on your LAN such
as FTP for file transfers or SMTP and POP3 for e-mail. The DSL-520T will accept remote requests for these services at
your Global IP Address, using the specified TCP or UDP protocol and port number, and then redirect these requests to
the server on your LAN with the LAN IP address you specify. Remember that the specified Private IP Address must be
within the useable range of the subnet occupied by the Router.
UDP/TCP port redirection is used to direct inbound traffic to the specified servers or workstations on your private
network. Port redirection can also be used to direct potentially hazardous packets to a proxy server outside your firewall.
For example, you can configure the Router to direct HTTP packets to a designated HTTP server in the DMZ. You can
define a set of instructions for a specific incoming port or for a range of incoming ports. Each set of instructions or rule
is indexed and can be modified or deleted later as needed.
The Virtual Server options include a list of preconfigured rules (listed below) for commonly used protocols in the
Virtual Server List. To enable a preconfigured rule, click the selection box for the rule you want to enable and click the
Apply button.
There are many different pre-configured rules available for specific functions such as Internet gaming, VPN, streaming
and interactive multi-media, standard TCP/IP protocols, reserved ports, p2p, network management applications, and so
on.
You may also create customized rules to manage TCP/UDP ports. The pre-configured rules include those listed in the
table here:
To configure a new port-forwarding rule for any of the pre-configured rules, follow these steps:
1. Select the WAN connection you want to use for the new rule from the Connection pull-down menu.
2. Select a LAN IP from the available client IP addresses listed in the pull-down menu; or, create a New IP by
clicking the button. This brings up the LAN Clients window (see next section).
3. Select the Category of the rule you are creating. The Available Rules for the category appear in a list.
4. Highlight to select the Available Rule you want to apply.
5. Click on the Add button to place the rule in the Applied Rules list of port forwarding that are actively
applied to the client
The Available Rules can be applied to a single client IP address. That is, it is not possible to use an applied rule for
multiple IP addresses on the LAN.
--Custom Forwarding Rules
The User category for port forwarding is used to set up customized port forwarding rules.
To set up custom TCP or UDP port forwarding rules, follow these steps:
1. Select the User category and click the Add button located below the Available Rules list. This will change the
window to look like the window below.
2. Type a Rule Name in the space provided.
3. Select the port Protocol from the pull-down menu - you may select TCP, UDP or both (TCP/UDP).
4. Configure a range of ports for forwarding. Type the lowest numbered port in the range in the Port Start space.
Type the highest numbered port in the Port End space. For a single port, just enter the same number in both
spaces.
5. Type a number for the Port Map in the space provided.
6. Click the Apply button to create the new rule. The new rule will appear listed in the table of custom port
forwarding rules.
------------------------------------------------
วันพุธที่ 12 พฤษภาคม พ.ศ. 2553
DSL-520B
>>> DSL-520B How to configure DSL-520B to connect to Internet ?
Please note use only hard-wired network connections, to do the setting.
** Disable firewall in your PC to avoid login problem**
Step 1 Connect your PC to the LAN port of your DSL-520B
Step 2 Start up an Internet explorer and key in 192.168.1.1 (by default)
By default Username: admin Password: admin
Step 3 Click on the Quick Setup
Step 4 Uncheck the DSL Auto-connection option to configure the VPI and VCI for various countries. The value usually comes customized for local ISP. Please check with your local ISP. Key in your VPI and VCI values.
VPI and VCI value;
Singnet : VPI:0, VCI:100
Pacnet : VPI:0, VCI:100
True : VPI:0, VCI:100
TOT : VPI:1, VCI:32
TT&T : VPI:0, VCI:33
CS Loginfo : VPI:0, VCI:33
BuddyBB : VPI:0, VCI:35
Streamyx : VPI:0, VCI:35
Maxis : VPI:0, VCI:35
Jaring : VPI:0, VCI:35
further info at your area ADSL setting. (e.g. ATM PVC Configuration, Service Category, Connection Type, Encapsulation Mode)
Step 5 Select the Connection Type and click Next.
Step 6 Enter the necessary information for Username and Password.
For Singnet user your Singnet username should end with 'xxxxxx@singnet' or 'xxxxxx@singnet1500' or 'xxxxx@singnetbusiness'
For Pacific net user your username should end with 'xxxxxx@pacific.net.sg' or 'xxxxxx@pacnet1500'
For Streamyx user your username should end with 'xxxxxx@streamyx'
Username might be vary please check with your ISP for the correct username.
Step 7 Enable the WAN Service and click Next.
Step 8 Configure IP address and Subnet Mask for LAN interface and click Next.
User can use the default IP address and subnet mask.
Step 9 Check through the configuration and click Save/Reboot.
Step 10 You will see that the DSL-520B is restarting. Please allow one minute of waiting time for the restart process.
------------------------------------------------
>>> DSL-520B Basic Installation/Configuration
Web-based Configuration Utility
Connect to the Router
1.To configure the WAN connection used by the Router it is first necessary to communicate with the Router through its management interface, which is HTML-based and can be accessed using a web browser. The easiest way to make sure your computer has the correct IP settings is to configure it to use the DHCP server in the Router.
The next section describes how to change the IP configuration for a computer running a Windows operating system to be a DHCP client.
2.Type “admin” for the User Name and “admin” in the Password field. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.
3.To access the Device Info window,
Quick Setup
1.Click the Quick Setup link on the left panel of the opening page to launch a series of setup windows.
2.Tick the DSL Auto-connect check box and then click the Next button.
If the ADSL connection is down, unselect the DSL Auto-connect checkbox and then click the Next button to manually assign VPI and VCI values.
3.This window allows you to set up ATM PVC configuration. Enter a Port Identifier, Virtual Path Identifier, and Virtual Channel Identifier. The VPI and VCI values should be provided by your ISP. This window also allows you to enable QoS by ticking the Enable Quality of Service check box. Click the Next button to continue.
4.CONNECTION TYPE
This window allows you to select the appropriate connection type. The choices include PPP over Ethernet (PPPoE), MAC Encapsulation Routing and Bridging (default).
This window also allows you to use the drop-down menu to select the desired Encapsulation Mode. Click the Next button to continue.
5.Click the PPP over Ethernet (PPPoE) radio button on this window. This window also allows you to use the drop-down menu to select the desired Encapsulation Mode. Click the Next button to continue.
6.This window allows you to set the username and the password for your PPP connection. This information is obtained from your ISP. Additional settings on this window will also depend on your ISP. Click the Next button to continue.
7.This window allows you to enable IGMP multicasting and WAN service. Click the Next button to continue.
8.This window allows you to enter an IP address and subnet mask for the LAN interface. In addition, you can either enable or disable the DHCP server.
To enable the DHCP server, enter a starting IP address, an ending IP address and a subnet mask. You may also choose to change the default value of the leased time. Click the Next button to continue.
9.This summary window allows you to confirm the settings you have just made. Click the Save/Reboot button to save your new PPP over Ethernet settings and restart the Router.
------------------------------------------------
>>> DSL-520B How to do port forwarding for the DSL-520B?
Open your computer Internet browser
Type in the address bar 192.168.1.1 Press Enter
Type in the username that is “admin” and the password is also “admin”. (If you have assigned the modem with a password, use that password.) Click OK
1. Click Advanced Settings, Click NAT, Click Add
2. Click NAT
3. Click Add
4. CKey in a Rule Name for your port forwarding rule under Custom Server.
5. Key in the IP address of the device under Server IP Address
6. Enter the ports that you want to open under External port start and end
7. Please choose the appropriate protocol type as well
8. Double check your port forwarding rules
9. Please click Save and Apply
***NOTE: This mode will appear if you’re WAN setting under PPPoE/PPPoA mode.
------------------------------------------------
>>> DSL-520B - How to configure Static IP in IPOA mode for DSL-520B (Modem + Router)
Link >> ftp://www.dlink.com.sg/DSL-520B/Updates - How to configure Static IP using IPOA on DSL-520B _Modem + Router Mode_.pdf
------------------------------------------------
Please note use only hard-wired network connections, to do the setting.
** Disable firewall in your PC to avoid login problem**
Step 1 Connect your PC to the LAN port of your DSL-520B
Step 2 Start up an Internet explorer and key in 192.168.1.1 (by default)
By default Username: admin Password: admin
Step 3 Click on the Quick Setup
Step 4 Uncheck the DSL Auto-connection option to configure the VPI and VCI for various countries. The value usually comes customized for local ISP. Please check with your local ISP. Key in your VPI and VCI values.
VPI and VCI value;
Singnet : VPI:0, VCI:100
Pacnet : VPI:0, VCI:100
True : VPI:0, VCI:100
TOT : VPI:1, VCI:32
TT&T : VPI:0, VCI:33
CS Loginfo : VPI:0, VCI:33
BuddyBB : VPI:0, VCI:35
Streamyx : VPI:0, VCI:35
Maxis : VPI:0, VCI:35
Jaring : VPI:0, VCI:35
further info at your area ADSL setting. (e.g. ATM PVC Configuration, Service Category, Connection Type, Encapsulation Mode)
Step 5 Select the Connection Type and click Next.
Step 6 Enter the necessary information for Username and Password.
For Singnet user your Singnet username should end with 'xxxxxx@singnet' or 'xxxxxx@singnet1500' or 'xxxxx@singnetbusiness'
For Pacific net user your username should end with 'xxxxxx@pacific.net.sg' or 'xxxxxx@pacnet1500'
For Streamyx user your username should end with 'xxxxxx@streamyx'
Username might be vary please check with your ISP for the correct username.
Step 7 Enable the WAN Service and click Next.
Step 8 Configure IP address and Subnet Mask for LAN interface and click Next.
User can use the default IP address and subnet mask.
Step 9 Check through the configuration and click Save/Reboot.
Step 10 You will see that the DSL-520B is restarting. Please allow one minute of waiting time for the restart process.
------------------------------------------------
>>> DSL-520B Basic Installation/Configuration
Web-based Configuration Utility
Connect to the Router
1.To configure the WAN connection used by the Router it is first necessary to communicate with the Router through its management interface, which is HTML-based and can be accessed using a web browser. The easiest way to make sure your computer has the correct IP settings is to configure it to use the DHCP server in the Router.
The next section describes how to change the IP configuration for a computer running a Windows operating system to be a DHCP client.
2.Type “admin” for the User Name and “admin” in the Password field. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.
3.To access the Device Info window,
Quick Setup
1.Click the Quick Setup link on the left panel of the opening page to launch a series of setup windows.
2.Tick the DSL Auto-connect check box and then click the Next button.
If the ADSL connection is down, unselect the DSL Auto-connect checkbox and then click the Next button to manually assign VPI and VCI values.
3.This window allows you to set up ATM PVC configuration. Enter a Port Identifier, Virtual Path Identifier, and Virtual Channel Identifier. The VPI and VCI values should be provided by your ISP. This window also allows you to enable QoS by ticking the Enable Quality of Service check box. Click the Next button to continue.
4.CONNECTION TYPE
This window allows you to select the appropriate connection type. The choices include PPP over Ethernet (PPPoE), MAC Encapsulation Routing and Bridging (default).
This window also allows you to use the drop-down menu to select the desired Encapsulation Mode. Click the Next button to continue.
5.Click the PPP over Ethernet (PPPoE) radio button on this window. This window also allows you to use the drop-down menu to select the desired Encapsulation Mode. Click the Next button to continue.
6.This window allows you to set the username and the password for your PPP connection. This information is obtained from your ISP. Additional settings on this window will also depend on your ISP. Click the Next button to continue.
7.This window allows you to enable IGMP multicasting and WAN service. Click the Next button to continue.
8.This window allows you to enter an IP address and subnet mask for the LAN interface. In addition, you can either enable or disable the DHCP server.
To enable the DHCP server, enter a starting IP address, an ending IP address and a subnet mask. You may also choose to change the default value of the leased time. Click the Next button to continue.
9.This summary window allows you to confirm the settings you have just made. Click the Save/Reboot button to save your new PPP over Ethernet settings and restart the Router.
------------------------------------------------
>>> DSL-520B How to do port forwarding for the DSL-520B?
Open your computer Internet browser
Type in the address bar 192.168.1.1 Press Enter
Type in the username that is “admin” and the password is also “admin”. (If you have assigned the modem with a password, use that password.) Click OK
1. Click Advanced Settings, Click NAT, Click Add
2. Click NAT
3. Click Add
4. CKey in a Rule Name for your port forwarding rule under Custom Server.
5. Key in the IP address of the device under Server IP Address
6. Enter the ports that you want to open under External port start and end
7. Please choose the appropriate protocol type as well
8. Double check your port forwarding rules
9. Please click Save and Apply
***NOTE: This mode will appear if you’re WAN setting under PPPoE/PPPoA mode.
------------------------------------------------
>>> DSL-520B - How to configure Static IP in IPOA mode for DSL-520B (Modem + Router)
Link >> ftp://www.dlink.com.sg/DSL-520B/Updates - How to configure Static IP using IPOA on DSL-520B _Modem + Router Mode_.pdf
------------------------------------------------
DSL-504T
>>> DSL-504T Basic Installation/Configuration (PPPOE)
1. Connect your PC to the LAN port of your DSL-504T
2. Start up a Internet explorer and key in 192.168.1.1 (by default)
3. Enter the Username: admin , Password: admin
*** To configure Connection 1 for PPPoE, follow the steps listed below. Some of the settings do not need to be
changed the first time the device is set up, but can be changed later if you choose.
4. Click the Connection 1 button under WAN Setup to view the default PPPoA Connection Setup configuration menu.
5. Select PPPoE from the Type: pull-down menu. The menu will blink momentarily
6. Type in a Name: for the connection or use the default name in the space provided
(conn_1_PPPoE_8_35 used in the above example).
8. Under Options, enable NAT and/or Firewall by selecting the corresponding selection box.7
9. If you are told to change the VPI or VCI values, type in the values given to you by your service
provider. Many users will be able to use the default settings.
10. Leave the default QoS values if you are unsure or the ISP did not provide this information.
11. Do not change the PCR or SCR values unless you are required to do so. If you are told to change these,type in the values given to you by your service provider.
12. Type the Username and Password used to verify the identity of your account. Typically, the Username is an account number assigned by your ISP and appears in the form account#@serviceprovider.com,while the Password may have been chosen by the account holder. For most users, the remaining settings will not need to be changed. See your ISP for further information.
13. Click the Apply button when you have entered all the information. The web browser will briefly go blank. You are now finished changing setting for the primary WAN connection known as Connection 1. It is now necessary to save the changes you just made and restart the Router.
14. To save the changes made to Connection 1, click the Tools tab and then click on the System
Commands button. Click on the Save All button to store the configuration settings. Click on Back
button to return to the System Commands menu.
15. Check the WAN connection status. Click the Status tab and then the Connection Status button. Look under WAN to view the State of Connection 1, it should read Connected. If the WAN connection state does not appear to Connected after a few minutes, go back to the Connection 1 Setup menu, check the settings and make sure they are correct.
------------------------------------------------
1. Connect your PC to the LAN port of your DSL-504T
2. Start up a Internet explorer and key in 192.168.1.1 (by default)
3. Enter the Username: admin , Password: admin
*** To configure Connection 1 for PPPoE, follow the steps listed below. Some of the settings do not need to be
changed the first time the device is set up, but can be changed later if you choose.
4. Click the Connection 1 button under WAN Setup to view the default PPPoA Connection Setup configuration menu.
5. Select PPPoE from the Type: pull-down menu. The menu will blink momentarily
6. Type in a Name: for the connection or use the default name in the space provided
(conn_1_PPPoE_8_35 used in the above example).
8. Under Options, enable NAT and/or Firewall by selecting the corresponding selection box.7
9. If you are told to change the VPI or VCI values, type in the values given to you by your service
provider. Many users will be able to use the default settings.
10. Leave the default QoS values if you are unsure or the ISP did not provide this information.
11. Do not change the PCR or SCR values unless you are required to do so. If you are told to change these,type in the values given to you by your service provider.
12. Type the Username and Password used to verify the identity of your account. Typically, the Username is an account number assigned by your ISP and appears in the form account#@serviceprovider.com,while the Password may have been chosen by the account holder. For most users, the remaining settings will not need to be changed. See your ISP for further information.
13. Click the Apply button when you have entered all the information. The web browser will briefly go blank. You are now finished changing setting for the primary WAN connection known as Connection 1. It is now necessary to save the changes you just made and restart the Router.
14. To save the changes made to Connection 1, click the Tools tab and then click on the System
Commands button. Click on the Save All button to store the configuration settings. Click on Back
button to return to the System Commands menu.
15. Check the WAN connection status. Click the Status tab and then the Connection Status button. Look under WAN to view the State of Connection 1, it should read Connected. If the WAN connection state does not appear to Connected after a few minutes, go back to the Connection 1 Setup menu, check the settings and make sure they are correct.
------------------------------------------------
DSL-500T
>>> DSL-500T Basic configuration
>>Access the Configuration Manager
To use the web-based management software, launch a suitable web browser and direct it to the IP address of the Router.
Type in http:// followed by the default IP address, 192.168.1.1 in the address bar of the browser. The URL in the address bar should read: http://192.168.1.1.
>>Login to Home Page
A new window will appear and you will be prompted for a user name and password to access the web-based manager.
Use the default user name admin and password admin for first time setup.
You should change the web-based manager access user name and password once you have verified that a connection can be established.
The user name and password allows any PC within the same subnet as the Modem to access the web-based manger.
To configure Connection 1 for PPPoE, follow the steps listed below.
Some of the settings do not need to be changed the first time the device is set up, but can be changed later if you choose.
1. Click the Connection 1 button under WAN Setup to view the default PPPoA Connection Setup configuration menu.
2. Select PPPoE from the Type: pull-down menu. The menu will blink momentarily
3. Type in a Name: for the connection or use the default name in the space provided (conn_1_PPPoE_8_35 used in the above example).
4. Under Options, enable NAT and/or Firewall by selecting the corresponding selection box.
5. If you are told to change the VPI or VCI values, type in the values given to you by your service provider. Many users will be able to use the default settings.
6. Leave the default QoS values if you are unsure or the ISP did not provide this information.
7. Do not change the PCR or SCR values unless you are required to do so. If you are told to change these, type in the values given to you by your service provider.
8. Type the Username and Password used to verify the identity of your account. Typically, the Username is an account number assigned by your ISP and appears in the form account#@serviceprovider.com, while the Password may have been chosen by the account holder. For most users, the remaining settings will not need to be changed. See your ISP for further information.
9. Click the Apply button when you have entered all the information. The web browser will briefly go blank. You are now finished changing setting for the primary WAN connection known as Connection 1. It is now necessary to save the changes you just made and restart the Router.
10. To save the changes made to Connection 1, click the Tools tab and then click on the System Commands button. Click on the Save All button to store the configuration settings. Click on Back button to return to the System Commands menu.
11. Check the WAN connection status. Click the Status tab and then the Connection Status button. Look under WAN to view the State of Connection 1, it should read Connected. If the WAN connection state does not appear to Connected after a few minutes, go back to the Connection 1 Setup menu, check the settings and make sure they are correct.
------------------------------------------------
>>Access the Configuration Manager
To use the web-based management software, launch a suitable web browser and direct it to the IP address of the Router.
Type in http:// followed by the default IP address, 192.168.1.1 in the address bar of the browser. The URL in the address bar should read: http://192.168.1.1.
>>Login to Home Page
A new window will appear and you will be prompted for a user name and password to access the web-based manager.
Use the default user name admin and password admin for first time setup.
You should change the web-based manager access user name and password once you have verified that a connection can be established.
The user name and password allows any PC within the same subnet as the Modem to access the web-based manger.
To configure Connection 1 for PPPoE, follow the steps listed below.
Some of the settings do not need to be changed the first time the device is set up, but can be changed later if you choose.
1. Click the Connection 1 button under WAN Setup to view the default PPPoA Connection Setup configuration menu.
2. Select PPPoE from the Type: pull-down menu. The menu will blink momentarily
3. Type in a Name: for the connection or use the default name in the space provided (conn_1_PPPoE_8_35 used in the above example).
4. Under Options, enable NAT and/or Firewall by selecting the corresponding selection box.
5. If you are told to change the VPI or VCI values, type in the values given to you by your service provider. Many users will be able to use the default settings.
6. Leave the default QoS values if you are unsure or the ISP did not provide this information.
7. Do not change the PCR or SCR values unless you are required to do so. If you are told to change these, type in the values given to you by your service provider.
8. Type the Username and Password used to verify the identity of your account. Typically, the Username is an account number assigned by your ISP and appears in the form account#@serviceprovider.com, while the Password may have been chosen by the account holder. For most users, the remaining settings will not need to be changed. See your ISP for further information.
9. Click the Apply button when you have entered all the information. The web browser will briefly go blank. You are now finished changing setting for the primary WAN connection known as Connection 1. It is now necessary to save the changes you just made and restart the Router.
10. To save the changes made to Connection 1, click the Tools tab and then click on the System Commands button. Click on the Save All button to store the configuration settings. Click on Back button to return to the System Commands menu.
11. Check the WAN connection status. Click the Status tab and then the Connection Status button. Look under WAN to view the State of Connection 1, it should read Connected. If the WAN connection state does not appear to Connected after a few minutes, go back to the Connection 1 Setup menu, check the settings and make sure they are correct.
------------------------------------------------
สมัครสมาชิก:
บทความ (Atom)